ITI SERVICES
Electrical
Thermography can quickly and accurately document problem areas
in your electrical and mechanical equipment. Loose or oxidized
electrical connections, unbalanced electrical loads, overloaded
electrical circuitry and improperly installed or insufficiently lubricated
bearings will show up clearly through the use of the infrared imaging
equipment. The recorded heat emission allows for accurate
identification of potential problem areas. Thermographic inspection
targets high and low voltage connections, bus run, transformers,
switch gear, motor control center, motors, and rotating equipment.
Inspections are conducted while the facility is in full operation. For a
picture of Sample Point Surveys, click here.
Roofing Inspection
Infrared testing of roofing systems allows a thermographer to locate
water-damaged areas and identify emerging problems before they
become costly. A quick, accurate, nondestructive thermographic
inspection may also eliminate unnecessary roof replacement.
Inspection Report:
Recommendations are prioritized into three categories: where
immediate corrective action is necessary, where corrective action
should be taken as soon as possible, and where corrective action
should be taken at the next scheduled shutdown. The inspection is
followed by an exit conference to review and discuss the findings.
VCD documentation of the inspection, including computer enhanced
photos of problem areas and a formal written report are processed
within two days of the completion of the inspection.
Ultrasonic Inspection
Package this important inspection feature with Infrared surveys.
"Ultrasonic Technology" uses high-pitch frequencies to inspect for
pressure and vacuum leaks, electrical emissions, bearing failure,
motor failure, underground leaks, steam traps, etc.
Floor Underground inspection.
Infrared testing of flooring underground systems allows a
thermographer to locate radiant heater elements, identify damage
areas and find emerging problems before they become costly. A
quick, accurate, nondestructive thermographic inspection allows you
to isolate problem sources without unnecessary flooring breaking
and digging.
Ceiling and Wall Moisture Inspection:
Infrared testing allows a thermographer to locate moisture, water and
cold air leaks in ceiling and wall systems before they create
expensive problems. With a quick, accurate, nondestructive
thermographic inspection, our thermographer can pinpoint problem
areas without tearing down prematurely tearing down undamaged
ceilings and walls.
Electrical
Thermography can quickly and accurately document problem areas
in your electrical and mechanical equipment. Loose or oxidized
electrical connections, unbalanced electrical loads, overloaded
electrical circuitry and improperly installed or insufficiently lubricated
bearings will show up clearly through the use of the infrared imaging
equipment. The recorded heat emission allows for accurate
identification of potential problem areas. Thermographic inspection
targets high and low voltage connections, bus run, transformers,
switch gear, motor control center, motors, and rotating equipment.
Inspections are conducted while the facility is in full operation. For a
picture of Sample Point Surveys, click here.
Roofing Inspection
Infrared testing of roofing systems allows a thermographer to locate
water-damaged areas and identify emerging problems before they
become costly. A quick, accurate, nondestructive thermographic
inspection may also eliminate unnecessary roof replacement.
Inspection Report:
Recommendations are prioritized into three categories: where
immediate corrective action is necessary, where corrective action
should be taken as soon as possible, and where corrective action
should be taken at the next scheduled shutdown. The inspection is
followed by an exit conference to review and discuss the findings.
VCD documentation of the inspection, including computer enhanced
photos of problem areas and a formal written report are processed
within two days of the completion of the inspection.
Ultrasonic Inspection
Package this important inspection feature with Infrared surveys.
"Ultrasonic Technology" uses high-pitch frequencies to inspect for
pressure and vacuum leaks, electrical emissions, bearing failure,
motor failure, underground leaks, steam traps, etc.
Floor Underground inspection.
Infrared testing of flooring underground systems allows a
thermographer to locate radiant heater elements, identify damage
areas and find emerging problems before they become costly. A
quick, accurate, nondestructive thermographic inspection allows you
to isolate problem sources without unnecessary flooring breaking
and digging.
Ceiling and Wall Moisture Inspection:
Infrared testing allows a thermographer to locate moisture, water and
cold air leaks in ceiling and wall systems before they create
expensive problems. With a quick, accurate, nondestructive
thermographic inspection, our thermographer can pinpoint problem
areas without tearing down prematurely tearing down undamaged
ceilings and walls.
 | |  | |  | |  | |  | |  | |  | |  |